Act-On Connection Details¶
Introduction¶
Connector Version
This documentation is based on version 23.0.8936 of the connector.
Get Started¶
Act-On Version Support
The connector leverages V1 of the Act-On API to enable bidirectional access to Act-On data.
Establish a Connection¶
Authenticate to Act-On¶
Act-On uses the OAuth authentication standard. To authenticate using OAuth, you will need to create an app to obtain the OAuthClientId
, OAuthClientSecret
, and CallbackURL
connection properties.
Desktop Applications¶
An embedded OAuth application is provided that simplifies OAuth desktop Authentication. Alternatively, you can create a custom application. See Creating a Custom OAuth App for information on creating custom applications and reasons for doing so.
For authentication, the only difference between the two methods is that you must set two additional connection properties when using custom OAuth applications.
After setting the following connection properties, you are ready to connect:
InitiateOAuth
: Set this toGETANDREFRESH
. You can useInitiateOAuth
to avoid repeating the OAuth exchange and manually setting theOAuthAccessToken
.OAuthClientId
: (custom applications only) Set to the Client ID in your application settings.OAuthClientSecret
: (custom applications only) Set to the Client Secret in your application settings.
When you connect, the connector opens the OAuth endpoint in your default browser. Log in and grant permissions to the application. The connector then completes the OAuth process as follows:
- Extracts the access token from the callback URL.
- Obtains a new access token when the old one expires.
- Saves OAuth values in
OAuthSettingsLocation
that persist across connections.
Web Applications¶
When connecting via a web application, you need to register a custom OAuth application with Act-On. See Creating a Custom OAuth App for more information. You can then use the driver to get and manage the OAuth token values.
First, get an OAuthAccessToken
by setting the following connection properties:
OAuthClientId
: Set to the client ID in your application settings.OAuthClientSecret
: Set to the client secret in your application settings.
Then call stored procedures to complete the OAuth exchange:
- Call the GetOAuthAuthorizationURL stored procedure. Set the CallbackURL input to the callback URL you specified in your application settings. If necessary, set the Scope parameter to request custom permissions. The stored procedure returns the URL of the OAuth endpoint.
- Open the URL, log in, and authorize the application. You are redirected back to the callback URL.
- Call the GetOAuthAccessToken stored procedure. Set the AuthMode input to
WEB
. Set the Verifier input to the "code" parameter in the query string of the callback URL. If necessary, set the Scope parameter to request custom permissions.
After you have obtained the access and refresh tokens, you can connect to data and refresh the OAuth access token either automatically or manually.
Automatic Refresh of the OAuth Access Token
To have the driver automatically refresh the OAuth access token, set the following on the first data connection:
InitiateOAuth
: Set this toREFRESH
.OAuthClientId
: Set this to the client ID in your application settings.OAuthClientSecret
: Set this to the client secret in your application settings.OAuthAccessToken
: Set this to the access token returned by GetOAuthAccessToken.OAuthRefreshToken
: Set this to the refresh token returned by GetOAuthAccessToken.OAuthSettingsLocation
: Set this to the location where the connector saves the OAuth token values, which persist across connections.
On subsequent data connections, the values for OAuthAccessToken and OAuthRefreshToken are taken from OAuthSettingsLocation
.
Manual Refresh of the OAuth Access Token
The only value needed to manually refresh the OAuth access token when connecting to data is the OAuth refresh token.
Use the RefreshOAuthAccessToken stored procedure to manually refresh the OAuthAccessToken
after the ExpiresIn parameter value returned by GetOAuthAccessToken has elapsed, then set the following connection properties:
OAuthClientId
: Set this to the client ID in your application settings.OAuthClientSecret
: Set this to the client secret in your application settings.
Then call RefreshOAuthAccessToken with OAuthRefreshToken
set to the OAuth refresh token returned by GetOAuthAccessToken. After the new tokens have been retrieved, open a new connection by setting the OAuthAccessToken property to the value returned by RefreshOAuthAccessToken.
Finally, store the OAuth refresh token so that you can use it to manually refresh the OAuth access token after it has expired.
Headless Machines¶
To configure the driver to use OAuth with a user account on a headless machine, you need to authenticate on another device that has an internet browser.
- Choose one of two options:
- Option 1: Obtain the
OAuthVerifier
value as described in "Obtain and Exchange a Verifier Code" below. - Option 2: Install the connector on a machine with a browser and transfer the OAuth authentication values after you authenticate through the usual browser-based flow, as described in "Transfer OAuth Settings" below.
- Option 1: Obtain the
- Then configure the connector to automatically refresh the access token on the headless machine.
Option 1: Obtain and Exchange a Verifier Code
To obtain a verifier code, you must authenticate at the OAuth authorization URL.
Follow the steps below to authenticate from the machine with an internet browser and obtain the OAuthVerifier
connection property.
-
Choose one of these options:
-
If you are using the Embedded OAuth Application click Act-On OAuth endpoint to open the endpoint in your browser.
-
If you are using a Custom OAuthd Application, create the Authorization URL by setting the following properties:
InitiateOAuth
: Set toOFF
.OAuthClientId
: Set to the client ID assigned when you registered your application.OAuthClientSecret
: Set to the client secret assigned when you registered your application.
Then call the GetOAuthAuthorizationURL stored procedure with the appropriate CallbackURL. Open the URL returned by the stored procedure in a browser. 2. Log in and grant permissions to the connector. You are then redirected to the callback URL, which contains the verifier code. 3. Save the value of the verifier code. Later you will set this in the
OAuthVerifier
connection property.
-
Next, you need to exchange the OAuth verifier code for OAuth refresh and access tokens. Set the following properties:
On the headless machine, set the following connection properties to obtain the OAuth authentication values.
InitiateOAuth
: Set this toREFRESH
.OAuthVerifier
: Set this to the verifier code.OAuthClientId
: (custom applications only) Set this to the client ID in your custom OAuth application settings.OAuthClientSecret
: (custom applications only) Set this to the client secret in the custom OAuth application settings.OAuthSettingsLocation
: Set this to persist the encrypted OAuth authentication values to the specified location.
After the OAuth settings file is generated, you need to re-set the following properties to connect:
InitiateOAuth
: Set this toREFRESH
.OAuthClientId
: (custom applications only) Set this to the client ID assigned when you registered your application.OAuthClientSecret
: (custom applications only) Set this to the client secret assigned when you registered your application.OAuthSettingsLocation
: Set this to the location containing the encrypted OAuth authentication values. Make sure this location gives read and write permissions to the connector to enable the automatic refreshing of the access token.
Option 2: Transfer OAuth Settings
Prior to connecting on a headless machine, you need to install and create a connection with the driver on a device that supports an internet browser. Set the connection properties as described in "Desktop Applications" above.
After completing the instructions in "Desktop Applications", the resulting authentication values are encrypted and written to the location specified by OAuthSettingsLocation
. The default filename is OAuthSettings.txt
.
After you have successfully tested the connection, copy the OAuth settings file to your headless machine.
On the headless machine, set the following connection properties to connect to data:
InitiateOAuth
: Set this toREFRESH
.OAuthClientId
: (custom applications only) Set this to the client ID assigned when you registered your application.OAuthClientSecret
: (custom applications only) Set this to the client secret assigned when you registered your application.OAuthSettingsLocation
: Set this to the location of your OAuth settings file. Make sure this location gives read and write permissions to the connector to enable the automatic refreshing of the access token.
Password Grant Authentication¶
When there is a trust relationship between the user and the application, the user can use the Password grant type to authenticate
from either a Desktop application or the web. To enable this authscheme, set AuthScheme
to OAuthPassword
.
Authentication by password grant is similar to OAuth -- in fact, it requires that you have already set up a custom OAuth application, as described in Creating a Custom OAuth App -- but once it's set up it does not require user interaction.
To connect, set these properties:
InitiateOAuth
:GETANDREFRESH
. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the access token in the connection string.AuthScheme
: Set theAuthScheme
toOAuthPassword
to perform authentication with the password grant type.User
: The Username of the user specified in your custom OAuth application.Password
: The Password of the user specified in your custom OAuth application.OAuthClientId
: The Client ID specified in your custom OAuth application.OAuthClientSecret
: The Client Secret specified in your custom OAuth application.
Create a Custom OAuth App¶
When to Create a Custom OAuth App¶
embeds OAuth Application Credentials with branding that can be used when connecting via either a Desktop Application or from a Headless Machine. Creating a custom OAuth application is, however, required when using a web application.
You may choose to create your own OAuth Application Credentials when you want to
- control branding of the Authentication Dialog
- control the redirect URI that the application redirects the user to after the user authenticates
- customize the permissions that you are requesting from the user
Follow the steps below to create a custom OAuth app and obtain the connection properties in a specific OAuth authentication flow.
Create a Custom OAuth App: Desktop¶
Sign up to https://developer.act-on.com/provision/
. After registering your account on Act-On you will get an email with the following connection properties:
OAuthClientId
OAuthClientSecret
The default value for the callback URL is http://localhost:80
. If you would like to change it you need to contact the API support for Act-On.
Important Notes¶
Configuration Files and Their Paths¶
- All references to adding configuration files and their paths refer to files and locations on the Harmony Agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.
Advanced Features¶
This section details a selection of advanced features of the Act-On connector.
User Defined Views
The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.
SSL Configuration
Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert
property under "Connection String Options" for more information.
Proxy
To configure the connector using Private Agent proxy settings, select the Use Proxy Settings
checkbox on the connection configuration screen.
Query Processing
The connector offloads as much of the SELECT statement processing as possible to Act-On and then processes the rest of the query in memory (client-side).
See Query Processing for more information.
User Defined Views¶
The Act-On connector allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.
There are two ways to create user defined views:
- Create a JSON-formatted configuration file defining the views you want.
- DDL statements.
Define Views Using a Configuration File¶
User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json
. The connector automatically detects the views specified in this file.
You can also have multiple view definitions and control them using the UserDefinedViews
connection property. When you use this property, only the specified views are seen by the connector.
This User Defined View configuration file is formatted as follows:
- Each root element defines the name of a view.
- Each root element contains a child element, called
query
, which contains the custom SQL query for the view.
For example:
{
"MyView": {
"query": "SELECT * FROM Images WHERE MyColumn = 'value'"
},
"MyView2": {
"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
}
}
Use the UserDefinedViews
connection property to specify the location of your JSON configuration file. For example:
"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"
Define Views Using DDL Statements¶
The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.
Create a View¶
To create a new view using DDL statements, provide the view name and query as follows:
CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;
If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews
connection property.
Alter a View¶
To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:
ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';
The view is then updated in the JSON configuration file.
Drop a View¶
To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.
DROP LOCAL VIEW [MyViewName]
This removes the view from the JSON configuration file. It can no longer be queried.
Schema for User Defined Views¶
User Defined Views are exposed in the UserViews
schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName
property.
Work with User Defined Views¶
For example, a SQL statement with a User Defined View called UserViews.RCustomers
only lists customers in Raleigh:
SELECT * FROM Customers WHERE City = 'Raleigh';
An example of a query to the driver:
SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';
Resulting in the effective query to the source:
SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';
That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.
SSL Configuration¶
Customize the SSL Configuration¶
By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.
To specify another certificate, see the SSLServerCert
property for the available formats to do so.
Data Model¶
The Act-On connector models entities in the Act-On API as tables, views, and stored procedures. These are defined in schema files, which are simple, text-based configuration files.
Lists in Act-On are exposed as views with the convention List_ListName. For each list there is another view List_ListName_Score where you can see the score of the people in the list.
Same logic for Segments in Act-On, they are exposed as views as Segment_SegmentName. And have an equivalent view Segment_SegmentName_Score.
Any changes you make to your Act-On account, such as adding a new list, adding new columns, or changing the data type of a column, will immediately be reflected
when you connect using the driver.
Using Query Processing
The connector offloads as much of the SELECT statement processing as possible to the Act-On APIs and then processes the rest of the query within the connector. The following sections document API limitations and requirements.
Views
Views are tables that cannot be modified. Typically, read-only data are shown as views.
Stored Procedures
Stored Procedures are function-like interfaces to the data source. They can be used to search, update, and modify information in the data source.
Tables¶
The connector models the data in Act-On as a list of tables in a relational database that can be queried using standard SQL statements.
Act-On Connector Tables¶
Name | Description |
---|---|
List_MyList | Create, update, delete, and query records of a List. |
Optout | Upsert, delete and query records of a Optout list. |
List_MyList¶
Create, update, delete, and query records of a List.
Table Specific Information¶
Every list that is created in your Act-On account is represented by a new table that is dynamically retrieved from your Act-On account. The name of the table has the following format:
List_nameOfTheList
For example, if the list in the Act-On UI is called 'MyList', the name of the table in the driver would be 'List_MyList'.
This is an example on how a list is exposed as table.
Select¶
Query records of the specified table.:
SELECT * FROM [List_MyList]
INSERT¶
Create a new record in the table.
Note
The ListId is required to insert a new record into a table.
All the fields that are not read-only can be specified.
INSERT INTO [List_MyList] ([First Name], [Last Name], [E-mail Address], [ListId]) VALUES ('John', 'Doe', 'john.doe@act-on.com', 'l-000d')
Update¶
Update details of a specific record.
Note
To update a record from a table, the ListId and E-mail Address must be specified.
All the fields that are not read-only can be specified.
UPDATE [List_MyList] SET [First Name] = 'Mohit', [Last Name] = 'Chaturvedi', [E-mail Address] = 'mohit@act-on.comm' WHERE [ListId] = 'l-000d' AND [E-mail Address] = 'john.doe@act-on.comm'
Upsert¶
Update details of a specific record if it exists, else will insert a new record.
Note
To upsert a record from a table, the ListId and E-mail Address must be specified.
All the fields that are not read-only can be specified.
UPSERT INTO [List_MyList] ([First Name], [Last Name], [E-mail Address], [ListId]) VALUES ('Shubham', 'Prakash', 'shubhamtesting@cdata.com', 'l-000a')
Delete¶
Delete a record of a table.
Note
To Delete a record the ListId and _contact_id_ must be specified.
All the fields that are not read-only can be specified.
DELETE FROM List_MyList WHERE [ListId] = 'l-000d' AND [_contact_id_] = 'l-000d:10'
Columns¶
Name | Type | ReadOnly | Description |
---|---|---|---|
\_contact_id\_ [KEY] | String | False | The _contact_id_ of the List_MyList. |
First Name | String | False | The First Name of the List_MyList. |
Last Name | String | False | The Last Name of the List_MyList. |
E-mail Address | String | False | The E-mail Address of the List_MyList. |
\_FORM | String | False | The _FORM of the List_MyList. |
\_CAMPAIGN | String | False | The _CAMPAIGN of the List_MyList. |
\_IPADDR | String | False | The _IPADDR of the List_MyList. |
\_BROWSER | String | False | The _BROWSER of the List_MyList. |
\_JSTZO | String | False | The _JSTZO of the List_MyList. |
\_TIME | String | False | The _TIME of the List_MyList. |
\_REFERRER | String | False | The _REFERRER of the List_MyList. |
\_EMAIL_REFERRER | String | False | The _EMAIL_REFERRER of the List_MyList. |
\_FORM_URL | String | False | The _FORM_URL of the List_MyList. |
\_SEARCH | String | False | The _SEARCH of the List_MyList. |
\_GEO_NAME | String | False | The _GEO_NAME of the List_MyList. |
\_GEO_COUNTRY_CODE | String | False | The _GEO_COUNTRY_CODE of the List_MyList. |
\_GEO_COUNTRY | String | False | The _GEO_COUNTRY of the List_MyList. |
\_GEO_STATE | String | False | The _GEO_STATE of the List_MyList. |
\_GEO_CITY | String | False | The _GEO_CITY of the List_MyList. |
\_GEO_POSTAL_CODE | String | False | The _GEO_POSTAL_CODE of the List_MyList. |
\_\_created_date | Datetime | False | The __created_date of the List_MyList. |
\_\_modified_date | Datetime | False | The __modified_date of the List_MyList. |
ListId | String | False | The ListId of the List_MyList. |
Optout¶
Upsert, delete and query records of a Optout list.
Table Specific Information¶
Select¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Timestamp
supports the '>=' , '>' , '<=' and '<' operators.
For example:
SELECT * FROM Optout WHERE Timestamp >= '2022-09-15 08:53:50.111' AND Timestamp <= '2022-09-16 00:30:33.14'
SELECT * FROM Optout WHERE Timestamp > '2022-09-15 08:53:50.111' AND Timestamp < '2022-09-16 00:30:33.14'
Upsert¶
Upsert can be executed by specifying the Email column. Following is an example of how to insert a single email into this table
UPSERT INTO Optout(Email) VALUES ('ym@cdata.com')
Multiple emails can also be added or updated. Following is an example of how to insert multiple emails into this table
UPSERT INTO Optout(Email) VALUES ('jk@cdata.com;mk@cdata.com')
DELETE¶
Delete can be executed by specifying the Email column in the WHERE Clause. Following is an example of how to delete a single email from this table
DELETE FROM Optout WHERE Email = 'ym@cdata.com'
Multiple emails can also be deleted. Following is an example of how to delete multiple emails into this table
DELETE FROM Optout WHERE Email = 'jk@cdata.com;mk@cdata.com'
Columns¶
Name | Type | ReadOnly | Description |
---|---|---|---|
Email | String | False | Email of the user. |
Origin | String | True | Origin. |
Timestamp | Timestamp | True | When the user joined the list. |
Views¶
Views are similar to tables in the way that data is represented; however, views are read-only.
Queries can be executed against a view as if it were a normal table.
Act-On Connector Views¶
Name | Description |
---|---|
Campaigns | Query the available campaigns ActOn. |
Categories | Query the available categories of subscription in ActOn. |
DrilldownReports | Query detailed reports about messages in ActOn. |
Hardbounce | Query records of a Hardbounce list. |
Images | Query the available images on your ActOn account. |
Media | Query the available media on your ActOn account. |
Messages | Query the available messages in ActOn. |
OtherLists | Query the hardbounce, spam complaint and optout lists on ActOn. This view has been deprecated. |
Programs | Query the available programs on ActOn. |
Reports | Query the available reports in ActOn. |
ReportsByPeriod | Query the reports related to messages in ActOn. |
ScoreDetails | Query the score details of a contact. |
Spamcomplaint | Query records of a Spamcomplaint list. |
SubscriptionOptOuts | Query the available subscriptions in ActOn. |
Users | Query the email senders for the current account in ActOn. |
Campaigns¶
Query the available campaigns ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Id
supports the '=' and 'IN' operators.
For example, the following queries are processed server side:
SELECT * FROM Campaigns WHERE Id = 0001
SELECT * FROM Campaigns WHERE ID IN (0001, 0002)
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | The ID of the campaign. |
Name | String | The name of the campaign. |
Created | Datetime | When the campaign was created. |
AssetIds | String | Asset ids of the campaigns. |
Description | String | Description of the campaign. |
Modified | Datetime | When the campaign was last modified. |
Urls | String | Urls related to the campaign. |
Categories¶
Query the available categories of subscription in ActOn.
View Specific Information¶
Act-On does not support any column for filtering this view.
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | The ID of the category. |
Name | String | The name of the category. |
Description | String | Description of the category. |
HeaderId | String | Header id. |
HeaderName | String | Header name. |
DrilldownReports¶
Query detailed reports about messages in ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
MessageId
supports the=
operator.Drilldown
supports the=
operator.
MessageId and Drilldown are required to select from this view and will be filtered by the Act-On API.
SELECT * FROM DrilldownReports WHERE MessageId = 's-0003-1803' AND Drilldown = 'SENT'
Columns¶
Name | Type | Description |
---|---|---|
MessageId | String | The ID of the message. |
Drilldown | String | Type of message. The allowed values are SENT, SUPPRESSED, OPENED, CLICKED, BOUNCED, OPT_OUT, SPAM. |
Email | String | The receiver email. |
Name | String | Name of the receiver. |
ListId | String | Id of the list the receiver belongs to. |
RecId | String | The ID of the receiver. |
Timestamp | Datetime | When the message was sent. |
Hardbounce¶
Query records of a Hardbounce list.
View Specific Information¶
Select¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Timestamp
supports the '>=' , '>' , '<=' and '<' operators.
For example:
SELECT * FROM Hardbounce WHERE Timestamp >= '2022-09-15 08:53:50.111' AND Timestamp <= '2022-09-16 00:30:33.14'
SELECT * FROM Hardbounce WHERE Timestamp > '2022-09-15 08:53:50.111' AND Timestamp < '2022-09-16 00:30:33.14'
Columns¶
Name | Type | Description |
---|---|---|
Email | String | Email of the user. |
Origin | String | Origin. |
Timestamp | Timestamp | When the user joined the list. |
Images¶
Query the available images on your ActOn account.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
FolderName
supports the '=' and 'IN' operators.
For example, the following queries are processed server side:
SELECT * FROM Images WHERE FolderName = 'New Folder'
SELECT Name, FolderName FROM Images WHERE FolderName IN ('New Folder', 'Default Folder')
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | Id of the image. |
FolderName | String | Name of the folder that contains the image. |
Name | String | Name of the image. |
CreationTime | Datetime | When the image was created. |
LastModified | Datetime | When the image was last modified. |
ImageUrl | String | Link to the image. |
ThumbUrl | String | Link to the image. |
Size | Int | Size of the image. |
Pseudo-Columns¶
Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.
Name | Type | Description |
---|---|---|
Type | String | Identifier for the next page of results. Do not set this value manually. |
Media¶
Query the available media on your ActOn account.
View Specific Information¶
Act-On does not support any column for filtering this view.
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | Id of the image. |
FolderName | String | Name of the folder that contains the image. |
Name | String | Name of the image. |
CreationTime | Datetime | When the image was created. |
LastModified | Datetime | When the image was last modified. |
Url | String | Link to the media. |
Size | Int | Size of the image. |
Messages¶
Query the available messages in ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Type
supports the=
operator.
For example, the following query is processed server side:
SELECT * FROM Messages WHERE Type = 'SENT'
Type can be one of: SENT, DRAFT, TEMPLATE, TRIGGERED, FAILED, SCHEDULED
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | The ID of the message. |
Timestamp | Datetime | When the message has been sent. |
Title | String | Title of the message. |
FolderName | String | The folder where the message is contained. |
Pseudo-Columns¶
Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.
Name | Type | Description |
---|---|---|
Type | String | Used as a filter to retrieve different types of messages. The allowed values are SENT, DRAFT, TEMPLATE, TRIGGERED, FAILED, SCHEDULED. |
OtherLists¶
Query the hardbounce, spam complaint and optout lists on ActOn. This view has been deprecated.
View Specific Information¶
To query data from this view, you must specify Type.
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Type
supports the=
operator.CreatedAfter
supports the=
operator.CreatedBefore
supports the=
operator.
For example, the following queries are processed server side:
SELECT * FROM [OtherLists] WHERE Type = 'OPTOUT'
SELECT * FROM [OtherLists] WHERE Type = 'OPTOUT' AND CreatedAfter = '2018-08-28T14:37:48.923+02:00' AND CreatedBefore = '2018-08-28T14:37:48.925+02:00'
SELECT * FROM [OtherLists] WHERE Type = 'HARDBOUNCE' AND CreatedBefore = '2019-09-28T14:39:48.924+02:00'
Columns¶
Name | Type | Description |
---|---|---|
Email | String | Email of the user. |
Timestamp | Datetime | When the user joined the list. |
Origin | String | |
Type | String | The type of list. The allowed values are HARDBOUNCE, SPAMCOMPLAINT, OPTOUT. |
Pseudo-Columns¶
Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.
Name | Type | Description |
---|---|---|
CreatedBefore | String | Only records created before the supplied value will be returned. |
CreatedAfter | String | Only records created after the supplied value will be returned. |
Programs¶
Query the available programs on ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Type
supports the=
operator.
For example, the following queries are processed server side:
SELECT * FROM Programs WHERE Type = 'RACK'
Columns¶
Name | Type | Description |
---|---|---|
Id [KEY] | String | The ID of the program. |
Name | String | The name of the program. |
IsFavorite | Bool | Flag denoting if the program is among the 'favorite' ones. |
Description | String | The description of the program. |
SrcIds | String | Ids of the lists involved in the program. |
SrcNames | String | Name of the lists involved in the program. |
MessageIds | String | Ids of the messages sent within the program. |
Created | Datetime | When the program was created. |
Modified | Datetime | When the program was last modified. |
NextRun | Datetime | When the program is going to run again. |
State | String | The state of the program. |
Running | Bool | Flag denoting if the program is running or not. |
Active | Int | Flag denoting if the program is active or not. |
Scheduled | Bool | Flag denoting if the program is scheduled or not. |
TagNames | String | List of tags related to the program. |
Valid | Bool | Flag denoting if the program is valid or not. |
Pseudo-Columns¶
Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.
Name | Type | Description |
---|---|---|
Type | String | Type of the program, used for filtering. The allowed values are RACK, EVENT, LIST_MAINT. |
Reports¶
Query the available reports in ActOn.
View Specific Information¶
To query data from this view, you must specify MessageId.
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
MessageId
supports the '=' and 'IN' operators.
For example, the following queries are processed server side:
SELECT * FROM Reports WHERE MessageId = 'd-0008'
SELECT * FROM Reports WHERE MessageId IN ('d-0008', 's-0004-1809')
Columns¶
Name | Type | Description |
---|---|---|
MessageId [KEY] | String | The ID of the message. |
Title | String | The title of the message. |
Status | String | The status of the message. |
Bounced | Int | The number of times the message generated a bounce. |
Clicked | String | The number of times the message has been clicked. |
Delivered | Int | The number of times the message has been delivered. |
EffectiveOpened | String | . |
HardBounced | Int | The number of times the message generated hard bounce. |
LastClick | Datetime | The timestamp of the last click. |
LastOpen | Datetime | The timestamp of the last opening. |
NotOpened | Int | The number of times the message has not been opened. |
NotSent | String | The number of times the message has not been sent. |
Opened | String | The number of times the message was opened. |
OptOut | Int | The number of times the receiver opted out. |
RedbroadcastClick | Int | . |
Sent | Int | The number of times the message has been sent. |
SentTo | String | The ids of the people who received the email. |
SoftBounced | Int | The number of times the message generated soft bounce. |
Spam | Int | The number of times has been considered as spam. |
Subject | String | The subject of the message. |
SuppressedOn | String | . |
ReportsByPeriod¶
Query the reports related to messages in ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Period
supports the '=' and 'IN' operators.
For example, the following queries are processed server side:
SELECT * FROM ReportsByPeriod WHERE Period = 'January 2018'
SELECT * FROM ReportsByPeriod WHERE Period IN ('January 2018', 'March 2018')
If not specified, the period will be the current month.
Columns¶
Name | Type | Description |
---|---|---|
Period | String | The period defined in the format '{month} yyyy' used to filter the reports. If not specified, report for the current month will return. |
DayOfMonth | Int | The day of the month the report is about. |
DayOfWeek | Int | The day of the week the report is about. |
Sent | Int | The number of sent messages. |
Bounced | Int | The number of bounced messages. |
Clicked | Int | The number of clicked messages. |
Opened | Int | The number of opened messages. |
OptedOut | Int | Th number of opted out. |
ScoreDetails¶
Query the score details of a contact.
View Specific Information¶
To query data from this view, you must specify ContactId.
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
ContactId
supports the '=' and 'IN' operators.
For example, the following queries are processed server side:
SELECT * FROM ScoreDetails WHERE ContactId = 'l-0004:2'
SELECT * FROM ScoreDetails WHERE ContactId IN ('l-0004:2', 'l-0004:3')
Columns¶
Name | Type | Description |
---|---|---|
ContactId [KEY] | String | Unique identifier of the contact. |
ActivityId | String | Unique identifier of the activity. |
Action | String | Brief description of the action. |
IdType | String | Type of the activity. |
Profile | Boolean | Whether or not the user has a profile. |
Score | Integer | Score of the activity. |
Specific | Boolean | Whether or not the activity is specific. |
Ago | Integer | Days ago that activity happened. |
InScoreRange | Boolean | Whether or not the activity is in score range. |
What | String | Object of the activity. |
When | Datetime | When the activity happened. |
Bin | String | Subject of the activity. |
Verb | String | Description of the activity. |
Spamcomplaint¶
Query records of a Spamcomplaint list.
View Specific Information¶
Select¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Timestamp
supports the '>=' , '>' , '<=' and '<' operators.
For example:
SELECT * FROM Spamcomplaint WHERE Timestamp >= '2022-09-15 08:53:50.111' AND Timestamp <= '2022-09-16 00:30:33.14'
SELECT * FROM Spamcomplaint WHERE Timestamp > '2022-09-15 08:53:50.111' AND Timestamp < '2022-09-16 00:30:33.14'
Columns¶
Name | Type | Description |
---|---|---|
Email | String | Email of the user. |
Origin | String | Origin. |
Timestamp | Timestamp | When the user joined the list. |
SubscriptionOptOuts¶
Query the available subscriptions in ActOn.
View Specific Information¶
The connector will use the Act-On API to process WHERE clause conditions built with the following columns and operators. The rest of the filter is executed client side within the connector.
Category
supports the=
operator.
Category is required to select from this view. For example, the following query is processed server side:
SELECT * FROM SubscriptionOptOuts WHERE Category = 'test'
Columns¶
Name | Type | Description |
---|---|---|
Email | String | The email of the subscribed user. |
Timestamp | Datetime | The time when the user subscribed. |
Category | String | The category of the subscription. This attribute is required for select operations. |
Users¶
Query the email senders for the current account in ActOn.
View Specific Information¶
Act-On does not support any column for filtering this view.
Columns¶
Name | Type | Description |
---|---|---|
UserId [KEY] | String | The universally unique identifier of the user. |
Email | String | The email of the user. |
Name | String | The name of the user. |
Title | String | The title of the user. |
Cell | String | The mobile phone of the user. |
Phone | String | The phone number of the user. |
Fax | String | The fax of the user. |
isVerified | Bool | Flag denoting if the user has been verified or not. |
Stored Procedures¶
Stored procedures are function-like interfaces that extend the functionality of the connector beyond simple SELECT/INSERT/UPDATE/DELETE operations with Act-On.
Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from Act-On, along with an indication of whether the procedure succeeded or failed.
Act-On Connector Stored Procedures¶
Name | Description |
---|---|
GetOAuthAccessToken | Gets an authentication token from ActOn. |
GetOAuthAuthorizationURL | Gets the authorization URL that must be opened separately by the user to grant access to your application. Only needed when developing Web apps. You will request the auth token from this URL. |
RefreshOAuthAccessToken | Refreshes the OAuth access token used for authentication with various Basecamp services. |
GetOAuthAccessToken¶
Gets an authentication token from ActOn.
Input¶
Name | Type | Description |
---|---|---|
AuthMode | String | The type of authentication mode to use. Select App for getting authentication tokens via a desktop app. Select Web for getting authentication tokens via a Web app. The allowed values are APP, WEB. The default value is APP. |
Scope | String | The list of permissions to request from the user. Please check the ActOn API for a list of available permissions. The default value is PRODUCTION. |
CallbackURL | String | Determines where the response is sent. The value of this parameter must exactly match one of the values registered in the settings for the app (including the HTTP or HTTPS schemes, capitalization, and trailing '/'). |
Verifier | String | The verifier returned from ActOn after the user has authorized your app to have access to their data. This value will be returned as a parameter to the callback URL in GetOAuthAuthorizationURL. |
State | String | This field indicates any state that may be useful to your application upon receipt of the response. Your application receives the same value it sent, as this parameter makes a round-trip to ActOn authorization server and back. Uses include redirecting the user to the correct resource in your site, using nonces, and mitigating cross-site request forgery. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
OAuthAccessToken | String | The access token used for communication with ActOn. |
OAuthRefreshToken | String | A token that may be used to obtain a new access token. |
ExpiresIn | String | The remaining lifetime for the access token in seconds. |
OAuthTokenTimeStamp | String | The access token created time. |
GetOAuthAuthorizationURL¶
Gets the authorization URL that must be opened separately by the user to grant access to your application. Only needed when developing Web apps. You will request the auth token from this URL.
Input¶
Name | Type | Description |
---|---|---|
CallbackUrl | String | The URL the user will be redirected to after authorizing your application. This value must match the Redirect URL in the ActOn app settings. |
Scope | String | A comma-separated list of permissions to request from the user. Please check the ActOn API for a list of available permissions. The default value is PRODUCTION. |
State | String | This field indicates any state that may be useful to your application upon receipt of the response. Your application receives the same value it sent, as this parameter makes a round-trip to ActOn authorization server and back. Uses include redirecting the user to the correct resource in your site, using nonces, and mitigating cross-site request forgery. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
URL | String | The authorization URL, entered into a Web browser to obtain the verifier token and authorize your app. |
RefreshOAuthAccessToken¶
Refreshes the OAuth access token used for authentication with various Basecamp services.
Input¶
Name | Type | Description |
---|---|---|
OAuthRefreshToken | String | The refresh token returned with the previous access token. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
OAuthAccessToken | String | The authentication token returned from Basecamp. This can be used in subsequent calls to other operations for this particular service. |
OAuthRefreshToken | String | A token that may be used to obtain a new access token. |
ExpiresIn | String | The remaining lifetime on the access token. |
System Tables¶
You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.
Schema Tables¶
The following tables return database metadata for Act-On:
- sys_catalogs: Lists the available databases.
- sys_schemas: Lists the available schemas.
- sys_tables: Lists the available tables and views.
- sys_tablecolumns: Describes the columns of the available tables and views.
- sys_procedures: Describes the available stored procedures.
- sys_procedureparameters: Describes stored procedure parameters.
- sys_keycolumns: Describes the primary and foreign keys.
- sys_indexes: Describes the available indexes.
Data Source Tables¶
The following tables return information about how to connect to and query the data source:
- sys_connection_props: Returns information on the available connection properties.
- sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.
Query Information Tables¶
The following table returns query statistics for data modification queries:
- sys_identity: Returns information about batch operations or single updates.
sys_catalogs¶
Lists the available databases.
The following query retrieves all databases determined by the connection string:
SELECT * FROM sys_catalogs
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
sys_schemas¶
Lists the available schemas.
The following query retrieves all available schemas:
SELECT * FROM sys_schemas
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
SchemaName | String | The schema name. |
sys_tables¶
Lists the available tables.
The following query retrieves the available tables and views:
SELECT * FROM sys_tables
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view. |
TableType | String | The table type (table or view). |
Description | String | A description of the table or view. |
IsUpdateable | Boolean | Whether the table can be updated. |
sys_tablecolumns¶
Describes the columns of the available tables and views.
The following query returns the columns and data types for the Images table:
SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Images'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view containing the column. |
ColumnName | String | The column name. |
DataTypeName | String | The data type name. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The storage size of the column. |
DisplaySize | Int32 | The designated column's normal maximum width in characters. |
NumericPrecision | Int32 | The maximum number of digits in numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The column scale or number of digits to the right of the decimal point. |
IsNullable | Boolean | Whether the column can contain null. |
Description | String | A brief description of the column. |
Ordinal | Int32 | The sequence number of the column. |
IsAutoIncrement | String | Whether the column value is assigned in fixed increments. |
IsGeneratedColumn | String | Whether the column is generated. |
IsHidden | Boolean | Whether the column is hidden. |
IsArray | Boolean | Whether the column is an array. |
IsReadOnly | Boolean | Whether the column is read-only. |
IsKey | Boolean | Indicates whether a field returned from sys_tablecolumns is the primary key of the table. |
sys_procedures¶
Lists the available stored procedures.
The following query retrieves the available stored procedures:
SELECT * FROM sys_procedures
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the stored procedure. |
SchemaName | String | The schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure. |
Description | String | A description of the stored procedure. |
ProcedureType | String | The type of the procedure, such as PROCEDURE or FUNCTION. |
sys_procedureparameters¶
Describes stored procedure parameters.
The following query returns information about all of the input parameters for the RefreshOAuthAccessToken stored procedure:
SELECT * FROM sys_procedureparameters WHERE ProcedureName='RefreshOAuthAccessToken' AND Direction=1 OR Direction=2
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the stored procedure. |
SchemaName | String | The name of the schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure containing the parameter. |
ColumnName | String | The name of the stored procedure parameter. |
Direction | Int32 | An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters. |
DataTypeName | String | The name of the data type. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The number of characters allowed for character data. The number of digits allowed for numeric data. |
NumericPrecision | Int32 | The maximum precision for numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The number of digits to the right of the decimal point in numeric data. |
IsNullable | Boolean | Whether the parameter can contain null. |
IsRequired | Boolean | Whether the parameter is required for execution of the procedure. |
IsArray | Boolean | Whether the parameter is an array. |
Description | String | The description of the parameter. |
Ordinal | Int32 | The index of the parameter. |
sys_keycolumns¶
Describes the primary and foreign keys.
The following query retrieves the primary key for the Images table:
SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Images'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
IsKey | Boolean | Whether the column is a primary key in the table referenced in the TableName field. |
IsForeignKey | Boolean | Whether the column is a foreign key referenced in the TableName field. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
sys_foreignkeys¶
Describes the foreign keys.
The following query retrieves all foreign keys which refer to other tables:
SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
ForeignKeyType | String | Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key. |
sys_primarykeys¶
Describes the primary keys.
The following query retrieves the primary keys from all tables and views:
SELECT * FROM sys_primarykeys
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
KeySeq | String | The sequence number of the primary key. |
KeyName | String | The name of the primary key. |
sys_indexes¶
Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.
The following query retrieves all indexes that are not primary keys:
SELECT * FROM sys_indexes WHERE IsPrimary='false'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the index. |
SchemaName | String | The name of the schema containing the index. |
TableName | String | The name of the table containing the index. |
IndexName | String | The index name. |
ColumnName | String | The name of the column associated with the index. |
IsUnique | Boolean | True if the index is unique. False otherwise. |
IsPrimary | Boolean | True if the index is a primary key. False otherwise. |
Type | Int16 | An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3). |
SortOrder | String | The sort order: A for ascending or D for descending. |
OrdinalPosition | Int16 | The sequence number of the column in the index. |
sys_connection_props¶
Returns information on the available connection properties and those set in the connection string.
When querying this table, the config connection string should be used:
jdbc:cdata:acton:config:
This connection string enables you to query this table without a valid connection.
The following query retrieves all connection properties that have been set in the connection string or set through a default value:
SELECT * FROM sys_connection_props WHERE Value <> ''
Columns¶
Name | Type | Description |
---|---|---|
Name | String | The name of the connection property. |
ShortDescription | String | A brief description. |
Type | String | The data type of the connection property. |
Default | String | The default value if one is not explicitly set. |
Values | String | A comma-separated list of possible values. A validation error is thrown if another value is specified. |
Value | String | The value you set or a preconfigured default. |
Required | Boolean | Whether the property is required to connect. |
Category | String | The category of the connection property. |
IsSessionProperty | String | Whether the property is a session property, used to save information about the current connection. |
Sensitivity | String | The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms. |
PropertyName | String | A camel-cased truncated form of the connection property name. |
Ordinal | Int32 | The index of the parameter. |
CatOrdinal | Int32 | The index of the parameter category. |
Hierarchy | String | Shows dependent properties associated that need to be set alongside this one. |
Visible | Boolean | Informs whether the property is visible in the connection UI. |
ETC | String | Various miscellaneous information about the property. |
sys_sqlinfo¶
Describes the SELECT query processing that the connector can offload to the data source.
Discovering the Data Source's SELECT Capabilities¶
Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.
Name | Description | Possible Values |
---|---|---|
AGGREGATE_FUNCTIONS | Supported aggregation functions. | AVG , COUNT , MAX , MIN , SUM , DISTINCT |
COUNT | Whether COUNT function is supported. | YES , NO |
IDENTIFIER_QUOTE_OPEN_CHAR | The opening character used to escape an identifier. | [ |
IDENTIFIER_QUOTE_CLOSE_CHAR | The closing character used to escape an identifier. | ] |
SUPPORTED_OPERATORS | A list of supported SQL operators. | = , > , < , >= , <= , <> , != , LIKE , NOT LIKE , IN , NOT IN , IS NULL , IS NOT NULL , AND , OR |
GROUP_BY | Whether GROUP BY is supported, and, if so, the degree of support. | NO , NO_RELATION , EQUALS_SELECT , SQL_GB_COLLATE |
STRING_FUNCTIONS | Supported string functions. | LENGTH , CHAR , LOCATE , REPLACE , SUBSTRING , RTRIM , LTRIM , RIGHT , LEFT , UCASE , SPACE , SOUNDEX , LCASE , CONCAT , ASCII , REPEAT , OCTET , BIT , POSITION , INSERT , TRIM , UPPER , REGEXP , LOWER , DIFFERENCE , CHARACTER , SUBSTR , STR , REVERSE , PLAN , UUIDTOSTR , TRANSLATE , TRAILING , TO , STUFF , STRTOUUID , STRING , SPLIT , SORTKEY , SIMILAR , REPLICATE , PATINDEX , LPAD , LEN , LEADING , KEY , INSTR , INSERTSTR , HTML , GRAPHICAL , CONVERT , COLLATION , CHARINDEX , BYTE |
NUMERIC_FUNCTIONS | Supported numeric functions. | ABS , ACOS , ASIN , ATAN , ATAN2 , CEILING , COS , COT , EXP , FLOOR , LOG , MOD , SIGN , SIN , SQRT , TAN , PI , RAND , DEGREES , LOG10 , POWER , RADIANS , ROUND , TRUNCATE |
TIMEDATE_FUNCTIONS | Supported date/time functions. | NOW , CURDATE , DAYOFMONTH , DAYOFWEEK , DAYOFYEAR , MONTH , QUARTER , WEEK , YEAR , CURTIME , HOUR , MINUTE , SECOND , TIMESTAMPADD , TIMESTAMPDIFF , DAYNAME , MONTHNAME , CURRENT_DATE , CURRENT_TIME , CURRENT_TIMESTAMP , EXTRACT |
REPLICATION_SKIP_TABLES | Indicates tables skipped during replication. | |
REPLICATION_TIMECHECK_COLUMNS | A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication. | |
IDENTIFIER_PATTERN | String value indicating what string is valid for an identifier. | |
SUPPORT_TRANSACTION | Indicates if the provider supports transactions such as commit and rollback. | YES , NO |
DIALECT | Indicates the SQL dialect to use. | |
KEY_PROPERTIES | Indicates the properties which identify the uniform database. | |
SUPPORTS_MULTIPLE_SCHEMAS | Indicates if multiple schemas may exist for the provider. | YES , NO |
SUPPORTS_MULTIPLE_CATALOGS | Indicates if multiple catalogs may exist for the provider. | YES , NO |
DATASYNCVERSION | The Data Sync version needed to access this driver. | Standard , Starter , Professional , Enterprise |
DATASYNCCATEGORY | The Data Sync category of this driver. | Source , Destination , Cloud Destination |
SUPPORTSENHANCEDSQL | Whether enhanced SQL functionality beyond what is offered by the API is supported. | TRUE , FALSE |
SUPPORTS_BATCH_OPERATIONS | Whether batch operations are supported. | YES , NO |
SQL_CAP | All supported SQL capabilities for this driver. | SELECT , INSERT , DELETE , UPDATE , TRANSACTIONS , ORDERBY , OAUTH , ASSIGNEDID , LIMIT , LIKE , BULKINSERT , COUNT , BULKDELETE , BULKUPDATE , GROUPBY , HAVING , AGGS , OFFSET , REPLICATE , COUNTDISTINCT , JOINS , DROP , CREATE , DISTINCT , INNERJOINS , SUBQUERIES , ALTER , MULTIPLESCHEMAS , GROUPBYNORELATION , OUTERJOINS , UNIONALL , UNION , UPSERT , GETDELETED , CROSSJOINS , GROUPBYCOLLATE , MULTIPLECATS , FULLOUTERJOIN , MERGE , JSONEXTRACT , BULKUPSERT , SUM , SUBQUERIESFULL , MIN , MAX , JOINSFULL , XMLEXTRACT , AVG , MULTISTATEMENTS , FOREIGNKEYS , CASE , LEFTJOINS , COMMAJOINS , WITH , LITERALS , RENAME , NESTEDTABLES , EXECUTE , BATCH , BASIC , INDEX |
PREFERRED_CACHE_OPTIONS | A string value specifies the preferred cacheOptions. | |
ENABLE_EF_ADVANCED_QUERY | Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side. | YES , NO |
PSEUDO_COLUMNS | A string array indicating the available pseudo columns. | |
MERGE_ALWAYS | If the value is true, The Merge Mode is forcibly executed in Data Sync. | TRUE , FALSE |
REPLICATION_MIN_DATE_QUERY | A select query to return the replicate start datetime. | |
REPLICATION_MIN_FUNCTION | Allows a provider to specify the formula name to use for executing a server side min. | |
REPLICATION_START_DATE | Allows a provider to specify a replicate startdate. | |
REPLICATION_MAX_DATE_QUERY | A select query to return the replicate end datetime. | |
REPLICATION_MAX_FUNCTION | Allows a provider to specify the formula name to use for executing a server side max. | |
IGNORE_INTERVALS_ON_INITIAL_REPLICATE | A list of tables which will skip dividing the replicate into chunks on the initial replicate. | |
CHECKCACHE_USE_PARENTID | Indicates whether the CheckCache statement should be done against the parent key column. | TRUE , FALSE |
CREATE_SCHEMA_PROCEDURES | Indicates stored procedures that can be used for generating schema files. |
The following query retrieves the operators that can be used in the WHERE clause:
SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'
Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.
Columns¶
Name | Type | Description |
---|---|---|
NAME | String | A component of SQL syntax, or a capability that can be processed on the server. |
VALUE | String | Detail on the supported SQL or SQL syntax. |
sys_identity¶
Returns information about attempted modifications.
The following query retrieves the Ids of the modified rows in a batch operation:
SELECT * FROM sys_identity
Columns¶
Name | Type | Description |
---|---|---|
Id | String | The database-generated ID returned from a data modification operation. |
Batch | String | An identifier for the batch. 1 for a single operation. |
Operation | String | The result of the operation in the batch: INSERTED, UPDATED, or DELETED. |
Message | String | SUCCESS or an error message if the update in the batch failed. |
sys_information¶
Describes the available system information.
The following query retrieves all columns:
SELECT * FROM sys_information
Columns¶
Name | Type | Description |
---|---|---|
Product | String | The name of the product. |
Version | String | The version number of the product. |
Datasource | String | The name of the datasource the product connects to. |
NodeId | String | The unique identifier of the machine where the product is installed. |
HelpURL | String | The URL to the product's help documentation. |
License | String | The license information for the product. (If this information is not available, the field may be left blank or marked as 'N/A'.) |
Location | String | The file path location where the product's library is stored. |
Environment | String | The version of the environment or rumtine the product is currently running under. |
DataSyncVersion | String | The tier of Sync required to use this connector. |
DataSyncCategory | String | The category of Sync functionality (e.g., Source, Destination). |
Advanced Configurations Properties¶
The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to Act-On. |
User | The Act-On user account used to authenticate. |
Password | The password used to authenticate the user. |
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthSettingsLocation | The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://' . |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
OAuthRefreshToken | The OAuth refresh token for the corresponding OAuth access token. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
Property | Description |
---|---|
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
Property | Description |
---|---|
MaxRows | Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from Act-On. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
RowScanDepth | The maximum number of rows to scan to look for the columns available in a table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
TypeDetectionScheme | Determines how to determine the data type of columns. |
UserDefinedViews | A filepath pointing to the JSON configuration file containing your custom views. |
Authentication¶
This section provides a complete list of authentication properties you can configure.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to Act-On. |
User | The Act-On user account used to authenticate. |
Password | The password used to authenticate the user. |
AuthScheme¶
The type of authentication to use when connecting to Act-On.
Possible Values¶
OAuth
, OAuthPassword
Data Type¶
string
Default Value¶
OAuth
Remarks¶
- OAuth: Set this to perform OAuth with the code grant type.
- OAuthPassword: Set this to perform OAuth with the password grant type.
User¶
The Act-On user account used to authenticate.
Data Type¶
string
Default Value¶
""
Remarks¶
Together with Password, this field is used to authenticate against the Act-On server.
Password¶
The password used to authenticate the user.
Data Type¶
string
Default Value¶
""
Remarks¶
The User and Password
are together used to authenticate with the server.
OAuth¶
This section provides a complete list of OAuth properties you can configure.
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthSettingsLocation | The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://' . |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
OAuthRefreshToken | The OAuth refresh token for the corresponding OAuth access token. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
InitiateOAuth¶
Set this property to initiate the process to obtain or refresh the OAuth access token when you connect.
Possible Values¶
OFF
, GETANDREFRESH
, REFRESH
Data Type¶
string
Default Value¶
OFF
Remarks¶
The following options are available:
OFF
: Indicates that the OAuth flow will be handled entirely by the user. An OAuthAccessToken will be required to authenticate.GETANDREFRESH
: Indicates that the entire OAuth Flow will be handled by the connector. If no token currently exists, it will be obtained by prompting the user via the browser. If a token exists, it will be refreshed when applicable.REFRESH
: Indicates that the connector will only handle refreshing the OAuthAccessToken. The user will never be prompted by the connector to authenticate via the browser. The user must handle obtaining the OAuthAccessToken and OAuthRefreshToken initially.
OAuthClientId¶
The client ID assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId
value, sometimes also called a consumer key, and a client secret, the OAuthClientSecret.
OAuthClientSecret¶
The client secret assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId, also called a consumer key. You will also receive a client secret, also called a consumer secret. Set the client secret in the OAuthClientSecret
property.
OAuthAccessToken¶
The access token for connecting using OAuth.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthAccessToken
property is used to connect using OAuth. The OAuthAccessToken
is retrieved from the OAuth server as part of the authentication process. It has a server-dependent timeout and can be reused between requests.
The access token is used in place of your user name and password. The access token protects your credentials by keeping them on the server.
OAuthSettingsLocation¶
The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://'
.
Data Type¶
string
Default Value¶
%APPDATA%\ActOn Data Provider\OAuthSettings.txt
Remarks¶
When InitiateOAuth is set to GETANDREFRESH
or REFRESH
, the connector saves OAuth values to avoid requiring the user to manually enter OAuth connection properties and to allow the credentials to be shared across connections or processes.
Instead of specifying a file path, you can use memory storage. Memory locations are specified by using a value starting with 'memory://'
followed by a unique identifier for that set of credentials (for example, memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike file-based storage, where credentials persist across connections, memory storage loads the credentials into static memory, and the credentials are shared between connections using the same identifier for the life of the process. To persist credentials outside the current process, you must manually store the credentials prior to closing the connection. This enables you to set them in the connection when the process is started again. You can retrieve OAuth property values with a query to the sys_connection_props
system table. If there are multiple connections using the same credentials, the properties are read from the previously closed connection.
The default location is "%APPDATA%\ActOn Data Provider\OAuthSettings.txt" with %APPDATA%
set to the user's configuration directory. The default values are
- Windows: "
register://%DSN
" - Unix: "%AppData%..."
- Mac: "%AppData%..."
where DSN is the name of the current DSN used in the open connection.
The following table lists the value of %APPDATA%
by OS:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Mac | ~/Library/Application Support |
Linux | ~/.config |
CallbackURL¶
The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings.
Data Type¶
string
Default Value¶
""
Remarks¶
During the authentication process, the OAuth authorization server redirects the user to this URL. This value must match the callback URL you specify in your app settings.
OAuthVerifier¶
The verifier code returned from the OAuth authorization URL.
Data Type¶
string
Default Value¶
""
Remarks¶
The verifier code returned from the OAuth authorization URL. This can be used on systems where a browser cannot be launched such as headless systems.
Authentication on Headless Machines¶
See to obtain the OAuthVerifier
value.
Set OAuthSettingsLocation along with OAuthVerifier
. When you connect, the connector exchanges the OAuthVerifier
for the OAuth authentication tokens and saves them, encrypted, to the specified location. Set InitiateOAuth to GETANDREFRESH to automate the exchange.
Once the OAuth settings file has been generated, you can remove OAuthVerifier
from the connection properties and connect with OAuthSettingsLocation set.
To automatically refresh the OAuth token values, set OAuthSettingsLocation and additionally set InitiateOAuth to REFRESH.
OAuthRefreshToken¶
The OAuth refresh token for the corresponding OAuth access token.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthRefreshToken
property is used to refresh the OAuthAccessToken when using OAuth authentication.
OAuthExpiresIn¶
The lifetime in seconds of the OAuth AccessToken.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthTokenTimestamp to determine when the AccessToken will expire.
OAuthTokenTimestamp¶
The Unix epoch timestamp in milliseconds when the current Access Token was created.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthExpiresIn to determine when the AccessToken will expire.
SSL¶
This section provides a complete list of SSL properties you can configure.
Property | Description |
---|---|
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
SSLServerCert¶
The certificate to be accepted from the server when connecting using TLS/SSL.
Data Type¶
string
Default Value¶
""
Remarks¶
If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.
This property can take the following forms:
Description | Example |
---|---|
A full PEM Certificate (example shortened for brevity) | -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE----- |
A path to a local file containing the certificate | C:\\cert.cer |
The public key (example shortened for brevity) | -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY----- |
The MD5 Thumbprint (hex values can also be either space or colon separated) | ecadbdda5a1529c58a1e9e09828d70e4 |
The SHA1 Thumbprint (hex values can also be either space or colon separated) | 34a929226ae0819f2ec14b4a3d904f801cbb150d |
If not specified, any certificate trusted by the machine is accepted.
Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).
Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.
Schema¶
This section provides a complete list of schema properties you can configure.
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
Location¶
A path to the directory that contains the schema files defining tables, views, and stored procedures.
Data Type¶
string
Default Value¶
%APPDATA%\ActOn Data Provider\Schema
Remarks¶
The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location
property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.
If left unspecified, the default location is "%APPDATA%\ActOn Data Provider\Schema" with %APPDATA%
being set to the user's configuration directory:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Mac | ~/Library/Application Support |
Linux | ~/.config |
BrowsableSchemas¶
This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.
Tables¶
This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
Views¶
Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
Miscellaneous¶
This section provides a complete list of miscellaneous properties you can configure.
Property | Description |
---|---|
MaxRows | Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from Act-On. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
RowScanDepth | The maximum number of rows to scan to look for the columns available in a table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
TypeDetectionScheme | Determines how to determine the data type of columns. |
UserDefinedViews | A filepath pointing to the JSON configuration file containing your custom views. |
MaxRows¶
Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Data Type¶
int
Default Value¶
-1
Remarks¶
Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other¶
These hidden properties are used only in specific use cases.
Data Type¶
string
Default Value¶
""
Remarks¶
The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.
Specify multiple properties in a semicolon-separated list.
Integration and Formatting¶
Property | Description |
---|---|
DefaultColumnSize | Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000. |
ConvertDateTimeToGMT | Determines whether to convert date-time values to GMT, instead of the local time of the machine. |
RecordToFile=filename | Records the underlying socket data transfer to the specified file. |
Pagesize¶
The maximum number of results to return per page from Act-On.
Data Type¶
int
Default Value¶
1000
Remarks¶
The Pagesize
property affects the maximum number of results to return per page from Act-On. Setting a higher value may result in better performance at the cost of additional memory allocated per page consumed.
PseudoColumns¶
This property indicates whether or not to include pseudo columns as columns to the table.
Data Type¶
string
Default Value¶
""
Remarks¶
This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".
RowScanDepth¶
The maximum number of rows to scan to look for the columns available in a table.
Data Type¶
int
Default Value¶
50
Remarks¶
The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.
Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.
Timeout¶
The value in seconds until the timeout error is thrown, canceling the operation.
Data Type¶
int
Default Value¶
60
Remarks¶
If Timeout
= 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.
If Timeout
expires and the operation is not yet complete, the connector throws an exception.
TypeDetectionScheme¶
Determines how to determine the data type of columns.
Possible Values¶
None
, RowScan
Data Type¶
string
Default Value¶
RowScan
Remarks¶
Property | Description |
---|---|
None | Setting TypeDetectionScheme to None will return all columns as the string type. |
RowScan | Setting TypeDetectionScheme to RowScan will scan rows to heuristically determine the data type. The RowScanDepth determines the number of rows to be scanned. |
UserDefinedViews¶
A filepath pointing to the JSON configuration file containing your custom views.
Data Type¶
string
Default Value¶
""
Remarks¶
User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json
. The connector automatically detects the views specified in this file.
You can also have multiple view definitions and control them using the UserDefinedViews
connection property. When you use this property, only the specified views are seen by the connector.
This User Defined View configuration file is formatted as follows:
- Each root element defines the name of a view.
- Each root element contains a child element, called
query
, which contains the custom SQL query for the view.
For example:
{
"MyView": {
"query": "SELECT * FROM Images WHERE MyColumn = 'value'"
},
"MyView2": {
"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
}
}
Use the UserDefinedViews
connection property to specify the location of your JSON configuration file. For example:
"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json
Note that the specified path is not embedded in quotation marks.