Active Campaign Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.8804 of the connector.

Get Started

ActiveCampaign Version Support

The connector leverages version 3 of the ActiveCampaign API to enable bidirectional access to ActiveCampaign data.

Establish a Connection

Connect to ActiveCampaign

ActiveCampaign supports authenticating with the API Key. To connect to ActiveCampaign, in your account navigate to the Developer page and set the following:

• URL: Navigate to the My Settings page to set this property. For example: https://<yourAccountName>.api-us1.com
• APIKey: Navigate to the Settings page to set this property. Each user in your ActiveCampaign account has their own unique API key.

Make sure to distinguish between My Settings and Settings when setting these properties.

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Data Model

Overview

The connector models ActiveCampaign resources like Contacts, Accounts as relational tables, allowing you to write SQL to query ActiveCampaign data.

Live connectivity to these objects means any changes to your ActiveCampaign account are immediately reflected when using the connector.

Views

Views are tables that cannot be modified. Typically, data that are read-only and cannot be updated are shown as views.

Dynamic Views

Along with the default static views, the connector also allows querying on dynamic views.

These are views that are created based on the "lists" (also called "audiences") in your ActiveCampaign account.
For example, suppose you have these 3 lists in your account: Master Contact List, New Audience, VIP List.

The connector lists 3 views based on them: List_MasterList, List_New Audience, List_VIP List.
The views return data about each contact that is a member of that specific list.

Tables

Tables describes the available tables. Tables are statically defined to model resources like Accounts, Deals, DealGroups, DealStages, Tasks, etc.

The connector also supports querying tables like AccountCustomFieldData, DealCustomFieldData, ContactCustomFieldData which represent custom field data information.

Additionally, the connector supports updating, inserting custom fields data from the main resource (available for the Accounts, Contacts, Deals tables) where custom fields are dynamically appended as main resource columns. See the specific table section for more information.

Tables

The connector models the data in ActiveCampaign as a list of tables in a relational database that can be queried using standard SQL statements.

Jitterbit Connector for ActiveCampaign Tables

AccountContacts

Usage information for the operation AccountContacts.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM AccountContacts WHERE Id = 10003

SELECT * FROM AccountContacts WHERE AccountId = 1 AND ContactId = 100

Insert

Inserting an account-contact association requires specifying a value for the AccountId and ContactId columns.

INSERT INTO AccountContacts (AccountId, ContactId) VALUES (2, 300)

INSERT INTO AccountContacts (AccountId, ContactId, Jobtitle) VALUES (2, 300, 'nurse')

Update

The driver supports updating account-contact information.

UPDATE AccountContacts SET ContactId = 3, JobTitle = 'updatedJobTitle' WHERE Id = 1

UPDATE AccountContacts SET JobTitle = 'updatedJobTitle' WHERE AccountId = 1

Delete

Remove all account-contacts association or an association by specifying the ID of the association.

DELETE FROM AccountContacts WHERE ID = 10003

Columns

AccountCustomFieldData

Create, modify, delete and query the available deal custom field data in ActiveCampaign.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM AccountCustomFieldData WHERE Id = 10003

SELECT * FROM AccountCustomFieldData WHERE AccountId = 1

Insert

Inserting an account custom field data requires specifying a value for the AccountId, CustomFieldId, FieldValue columns.

Additionally, the connector supports inserting account custom fields data from the Accounts table. See Accounts for more information.

INSERT INTO AccountCustomFieldData (FieldValue, CustomFieldId, AccountId) VALUES ('custom field value', 1, 5)

Update

The connector supports updating account custom field data information. Updating an account custom field data requires specifying a value for the ID and CustomFieldId columns.

Additionally, it is possible to update account custom fields data from the Accounts table.

UPDATE AccountCustomFieldData SET FieldValue = 'Custom Field Value' WHERE ID = 13 AND CustomFieldId = 1

Delete

The connector supports removing accounts' custom field data.

DELETE FROM AccountcustomFieldData WHERE ID = 10

Columns

Accounts

View many or all contacts by including their ID's or various filters.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Accounts WHERE Id = 10003

SELECT * FROM Accounts WHERE Name = 'testAccount'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the AccountCustomFieldData table.

Insert

Inserting an account requires specifying the account name.

INSERT INTO Accounts (Name) VALUES ('testAccount2')

INSERT INTO Accounts (Name, AccountUrl) VALUES ('account', 'http://accountUrl.com/')

Additionally, the connector supports inserting account and account custom fields data from the Accounts table. All custom field columns start with CF_.

INSERT INTO Accounts (Name, CF_Description, CF_Hidden, CF_Number) VALUES ('testAccount3', 'custom field value', 'custom field value', 123)

Update

The connector supports updating account information.

Additionally, it is possible to update account custom fields data from the Accounts table.

UPDATE Accounts SET Name = 'updatedName', AccountUrl = 'http://updatedAccountUrl.com/' WHERE Id = 1

UPDATE Accounts SET Name = 'updatedName', CF_Description = 'custom field value', CF_Hidden = 'custom field value' WHERE ID = 1

Delete

Remove all accounts or an account by specifying the ID of the account.

DELETE FROM Accounts WHERE ID = 10003

Columns

ContactCustomFieldData

Create, modify, delete and query the available contact custom field data in ActiveCampaign.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM ContactCustomFieldData WHERE Id = 10003

SELECT * FROM ContactCustomFieldData WHERE FieldValue = 'custom field value'

Insert

Inserting a contact custom field data requires specifying a value for the ContactId, FieldId, FieldValue columns.

Additionally, the connector supports inserting contact custom fields data from the Contacts table. See Contacts for more information.

INSERT INTO ContactCustomFieldData (FieldValue, FieldId, ContactId) VALUES ('custom field value', 1, 5)

Update

The connector supports updating contact custom field data information. Updating contact custom field data requires specifying a value for the Id, ContactId and FieldId columns.

Additionally, it is possible to update contact custom fields data from the Contacts table.

UPDATE ContactCustomFieldData SET FieldValue = 'custom field value' WHERE ID = 8 AND ContactId = 3 AND FieldId = 2"

Delete

The connector supports removing contact custom field data.

DELETE FROM ContactCustomFieldData WHERE ID = 10

Columns

Contacts

View many or all contacts by including their ID's or various filters.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Contacts WHERE Id = 10

SELECT * FROM Contacts WHERE Udate >= '2019-06-30T10:44:34-05:00'

SELECT * FROM Contacts WHERE Udate <= '2021-06-30T10:44:34-05:00'

SELECT * FROM Contacts WHERE Cdate >= '2019-06-30T10:44:34-05:00' AND Cdate <= '2021-06-30T10:44:34-05:00'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the ContactCustomFieldData table.

Insert

Inserting a contact requires specifying the contact email.

INSERT INTO Contacts (Email) VALUES ('testcontact@test.com')

INSERT INTO Contacts (Email, FirstName, LastName, Phone) VALUES ('test@test.com', 'test', 'test', 'contactphonenumber')

Additionally, the connector supports inserting contact and contact custom fields data from the Contacts table. All custom field columns start with CF_.

INSERT INTO Contacts (Name, CF_Description, CF_Hidden, CF_Number) VALUES ('testcontact3', 'custom field value', 'custom field value', 123)

Update

The connector supports updating contact information.

Additionally, it is possible to update contact custom fields data from the Contacts table.

UPDATE Contacts SET FirstName = 'updatedName' WHERE Id = 1

UPDATE Contacts SET CF_CustomField1 = 'custom field value', CF_CustomField2 = 'custom field value' WHERE ID = 1

Bulk Import Contacts

The connector supports uploading large numbers of contacts into your account. This operation includes:

• Creating new contacts
• Updating existing contacts
• Subscribing and unsubscribing from lists

Contacts are imported in batches of up to 250 items. The importer is not recommended to be used for a small number of contacts. You can import contacts as below:

INSERT INTO Contacts#TEMP (Email) VALUES ('email1@test.com')

INSERT INTO Contacts#TEMP (Email) VALUES ('email2@test.com')

UPSERT INTO Contacts (Email) SELECT Email FROM Contacts#TEMP

Additionally, the connector supports BULK INSERT for the Contacts table. Please note this operation will cause a cost in performance as the connector validates if the submitted contacts exist before importing them.

INSERT INTO Contacts#TEMP (Email) VALUES ('email1@test.com')

INSERT INTO Contacts#TEMP (Email) VALUES ('email2@test.com')

INSERT INTO Contacts (Email) SELECT Email FROM Contacts#TEMP

To subscribe and unsubscribe contacts from a specific list set a value for the SubscribeTo and/or UnsubcribeFrom columns which accept a comma-separated list of list ids. For example:

INSERT INTO Contacts#TEMP (Email, SubscribeTo, UnsubcribeFrom) VALUES ('email1@test.com', '1,2', '6,12')

INSERT INTO Contacts#TEMP (Email, SubscribeTo, UnsubcribeFrom) VALUES ('email2@test.com', '3,7', '6,1')
UPSERT INTO Contacts (Email, SubscribeTo, UnsubcribeFrom) SELECT Email, SubscribeTo, UnsubcribeFrom FROM Contacts#TEMP

Contacts must meet all the following criteria in order to be created or updated with this API:

• The imported contacts may not exceed your account limit
• The contact must have an email address
• The contact's email address must not be on an exclusion list
• The contact's email must not be on a list of bounced email addresses
• The contact must not have unsubscribed to a list that the import would add them to

If contacts do not meet all of these requirements, they will be skipped by the importer.

Delete

Remove all contacts or a contact by specifying the ID of the contact.

DELETE FROM Contacts WHERE ID = 10003

Columns

DealCustomFieldData

Create, modify, delete and query the available deal custom field data in ActiveCampaign.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealCustomFieldData WHERE Id = 10003

SELECT * FROM DealCustomFieldData WHERE DealId = 1

Insert

Inserting a deal custom field data requires specifying a value for the DealId, CustomFieldId, and FieldValue columns.

Additionally, the connector supports inserting deal custom fields data from the Deals table. See Deals for more information.

INSERT INTO DealCustomFieldData (FieldValue, CustomFieldId, DealId) VALUES ('custom field value', 1, 5)

Update

The connector supports updating deal custom field data information. Updating deal custom field data requires specifying a value for the Id, DealId and CustomFieldId columns.

Additionally, it is possible to update deal custom fields data from the Deals table.

UPDATE DealCustomFieldData SET FieldValue = 'custom field value' WHERE ID = 8 AND DealId = 3 AND CustomFieldId = 2

Delete

The connector supports removing deal custom field data.

DELETE FROM DealCustomFieldData WHERE ID = 10

Columns

DealGroups

Lists all existing accounts.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealGroups WHERE Id = 10003

SELECT * FROM DealGroups WHERE Title = 'title'

Insert

Inserting a pipeline/dealgroup requires specifying a value for the Currency, Title columns.

INSERT INTO DealGroups (Currency, Title) VALUES (2, 300)

INSERT INTO DealGroups (Currency, Title, AutoAssign, AllUsers, AllGroups) VALUES ('USD', 'title', 1, 0, 1)

Update

The connector supports updating pipeline/dealgroup information.

UPDATE DealGroups SET AllUsers = 0, AllGroups = 1, Currency = 'EUR' WHERE Id = 1

Delete

Remove all pipelines or a pipeline by specifying the ID of the dealgroup.

DELETE FROM DealGroups WHERE ID = 10003

Columns

Deals

Usage information for the operation Deals.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Deals WHERE Id = 10

SELECT * FROM Deals WHERE GroupId = 1

SELECT * FROM Deals WHERE OwnerId = 1

SELECT * FROM Deals WHERE Stage = 1 AND Title = 'title'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the DealCustomFieldData table.

Insert

Inserting a deal requires specifying a value for the GroupId, Stage, OwnerId, Title, Value, Currency columns and a value for AccountId or ContactId column.

INSERT INTO Deals (AccountId, GroupId, Stage, OwnerId, Title, Value, Currency) VALUES (1, 1, 1, 1, 'title', 100, 'USD')

INSERT INTO Deals (Email, FirstName, LastName, Phone) VALUES ('test@test.com', 'test', 'test', 'dealphonenumber')

Additionally, the connector supports inserting deal and deal custom fields data from the Deals table. All custom field columns start with CF_.

INSERT INTO Deals (AccountId, GroupId, Stage, OwnerId, Title, Value, Currency, CF_CustomField1, CF_CustomField2, CF_CustomField3) VALUES (1, 1, 1, 1, 'title', 100, 'USD', 'value', 'value', 'value')

Update

The connector supports updating deal information.

Additionally, it is possible to update deal custom fields data from the Deals table.

UPDATE Deals SET Title = 'updatedTitle' WHERE Id = 1

UPDATE Deals SET CF_CustomField1 = 'custom field value', CF_CustomField2 = 'custom field value' WHERE ID = 1

Delete

Remove all deals or a deal by specifying the ID of the deal.

DELETE FROM Deals

DELETE FROM Deals WHERE ID = 10003

Columns

DealStages

Usage information for the operation DealStages.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealStages WHERE Id = 10003

SELECT * FROM DealStages WHERE Title = 'title' AND GroupId = 1

Insert

Inserting a stage requires specifying a value for the GroupId, Title columns.

INSERT INTO DealStages (GroupId, Title) VALUES (2, 'title')

INSERT INTO DealStages (Title, GroupId, OrderId, CardRegion3, Color, Width) VALUES ('TestStage', 1, 2, 'hide-avatar', '434343', '280')

Update

The connector supports updating stage/dealstage information.

UPDATE DealStages SET Title = 'updatedTitle' WHERE Id = 1

Delete

Remove all stages or a stage by specifying the ID of the stage.

DELETE FROM DealStages WHERE ID = 10003

Columns

Tasks

Lists all existing accounts.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Tasks WHERE Id = 10003

SELECT * FROM Tasks WHERE DealTaskType = 1

SELECT * FROM Tasks WHERE DueDate >= '2019-06-30T10:44:34-05:00'

SELECT * FROM Tasks WHERE DueDate <= '2021-06-30T10:44:34-05:00'

SELECT * FROM Tasks WHERE OutcomeId = 1 AND RelId = 1 AND Status = 1

Insert

Inserting a stage requires specifying a value for the DealTaskType, DueDate, Relid columns.

INSERT INTO Tasks (DealTaskType, DueDate, Relid) VALUES (2, '2021-06-30T10:44:34-05:00', 7)

Update

The connector supports updating stage/dealstage information.

UPDATE Tasks SET Title = 'updatedTitle' WHERE Id = 1

Delete

Remove all stages or a stage by specifying the ID of the stage.

DELETE FROM Tasks WHERE ID = 10003

Columns

Views

Views are similar to tables in the way that data is represented; however, views are read-only.

Queries can be executed against a view as if it were a normal table.

Jitterbit Connector for ActiveCampaign Views

Addresses

Usage information for the operation Addresses.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM AccountContacts WHERE Id = 10003

Columns

Automations

Usage information for the operation Automations.rsd.

Columns

Campaigns

Query the campaigns information in ActiveCampaign.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Campaigns WHERE Id = 10003

Columns

ContactAutomations

View many or all contacts by including their ID's or various filters.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM ContactAutomations WHERE Id = 10003

Columns

ContactLists

Retrieve ContactList for each contact Group or for the specific Contact group.

Table Specific Information

Select

Retrieving information from ContactLists requires specifying a ContactId.

SELECT * FROM ContactLists WHERE ContactId = 1000

Columns

ContactTags

Retrieve tags added for each contact or for the specific Contact Id

Table Specific Information

Select

Retrieving information for ContactTags requires specifying a ContactId.

SELECT * FROM ContactTags WHERE ContactId = 1

Columns

DealActivities

Retrieve Deal Activities for each Deal or for the specific Deal Id.

Columns

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Lists

Usage information for the operation Lists.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Lists WHERE Id = 1

SELECT * FROM Lists WHERE Name = 'list1'

In addition the connector supports retrieving information about members of lists in your account by supporting them dynamically as VIEWS. Selecting from a dynamic list will return information about all the contacts that are members of that list. Lists names always start with "List_".

Columns

Scores

View many or all contacts by including their ID's or various filters.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Scores WHERE Id = 10

Columns

Tags

View many or all tags by including their ID's or various filters.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Tags WHERE Id = 10003

Columns

TrackingLogs

Retrieve trackingLogs for the specific contact or all contacts

Columns

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Users

Usage information for the operation Users.rsd.

Table Specific Information

Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Users WHERE Id = 10003

Columns

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for ActiveCampaign:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Contacts table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Contacts'

Columns

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2

Columns

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the Contacts table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Contacts'

Columns

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys

Columns

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:activecampaign:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

SSL

Schema

Miscellaneous

Authentication

This section provides a complete list of authentication properties you can configure.

APIKey

The APIKey obtained from the ActiveCampaign UI.

Data Type

string

Default Value

""

Remarks

API key can be found in your account on the Settings page under the "Developer" tab. Each user in your ActiveCampaign account has their own unique API key.

URL

Base URL which is used to access the API.

Data Type

string

Default Value

""

Remarks

URL can be found in your account on the My Settings page under the "Developer" tab. For example: https://{yourAccountName}.api-us1.com

SSL

This section provides a complete list of SSL properties you can configure.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\ActiveCampaign Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\ActiveCampaign Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

Pagesize

The maximum number of results to return per page from ActiveCampaign.

Data Type

int

Default Value

100

Remarks

The Pagesize property affects the maximum number of results to return per page from ActiveCampaign. ActiveCampaign allows a maximum of 100 records to be returned in each page.

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UserDefinedViews

A filepath pointing to the JSON configuration file containing your custom views.

Data Type

string

Default Value

""

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM Contacts WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.