Microsoft Exchange v2 connection

Introduction

A Microsoft Exchange v2 connection, created using the Microsoft Exchange v2 connector, establishes access to Microsoft Exchange. These activities, once configured, interact with Microsoft Exchange through the connection.

Create or edit a Microsoft Exchange v2 connection

A new Microsoft Exchange v2 connection is created using the Microsoft Exchange v2 connector from one of these locations:

The design component palette's Project endpoints and connectors tab (see Design component palette).
The Global Connections page (see Create a global endpoint in Global Connections).

An existing Microsoft Exchange v2 connection can be edited from these locations:

The design component palette's Project endpoints and connectors tab (see Design component palette).
The project pane's Components tab (see Component actions menu in Project pane Components tab).
The Global Connections page (see Edit a global endpoint in Global Connections).

Configure a Microsoft Exchange v2 connection

Each user interface element of the Microsoft Exchange v2 connection configuration screen is described below.

Tip

Fields with a variable icon support using global variables, project variables, and Jitterbit variables. Begin either by typing an open square bracket [ into the field or by clicking the variable icon to display a list of the existing variables to choose from.

Connection Name: Enter a name to use to identify the connection. The name must be unique for each Microsoft Exchange v2 connection and must not contain forward slashes (/) or colons (:). This name is also used to identify the Microsoft Exchange v2 endpoint, which refers to both a specific connection and its activities.
Platform: Select the platform, one of:
- Exchange2007
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2007_SP1
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2010
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2010_SP1
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2010_SP2
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2013
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange2013_SP1
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
  - Auth Scheme: Select the authorization scheme, one of:
    - NTLM
      - User: Enter the user.
      - Password: Enter the password.
    - Digest
      - User: Enter the user.
      - Password: Enter the password.
    - Negotiate
      - User: Enter the user.
      - Password: Enter the password.
      - Kerberos KDC: Enter the Kerberos KDC.
      - Kerberos Realm: Enter the Kerberos realm.
      - Kerberos SPN: Enter the Kerberos SPN.
      - Kerberos Keytab File: Enter the Kerberos keytab file.
      - Kerberos Ticket Cache: Enter the Kerberos ticket cache.
    - Basic
      - User: Enter the user.
      - Password: Enter the password.
    - NONE
- Exchange_Online
  - Schema: Select the schema, one of:
    - EWS
      - Server: Enter the server.
    - MSGraph
      - Group Id: Enter the group ID.
  - Auth Scheme: Select the authorization scheme, one of:
    - OAuth
      - Initiate OAuth: Select the OAuth setting, one of:
        
        OFF
        
        OAuth Access Token: Enter the OAuth access token.
        
        GETANDREFRESH
        
        REFRESH
        
        OAuth Access Token: Enter the OAuth access token.
      - OAuth Refresh Token: Enter the OAuth refresh token.
    - AzureAD
      - Initiate OAuth: Select the OAuth setting, one of:
        
        OFF
        
        OAuth Access Token: Enter the OAuth access token.
        
        GETANDREFRESH
        
        REFRESH
        
        OAuth Access Token: Enter the OAuth access token.
      - Azure Tenant: Enter the Azure tenant.
      - OAuth Refresh Token: Enter the OAuth refresh token.
    - AzureMSI
    - AzureServicePrincipal
      - Initiate OAuth: Select the OAuth setting, one of:
        
        OFF
        
        OAuth Access Token: Enter the OAuth access token.
        
        GETANDREFRESH
        
        REFRESH
        
        OAuth Access Token: Enter the OAuth access token.
      - Azure Tenant: Enter the Azure tenant.
      - OAuth Client Id: Enter the OAuth client ID.
      - OAuth Client Secret: Enter the OAuth client secret.
      - OAuth Refresh Token: Enter the OAuth refresh token.
    - AzureServicePrincipalCert
      - Initiate OAuth: Select the OAuth setting, one of:
        
        OFF
        
        OAuth Access Token: Enter the OAuth access token.
        
        GETANDREFRESH
        
        REFRESH
        
        OAuth Access Token: Enter the OAuth access token.
      - Azure Tenant: Enter the Azure tenant.
      - OAuth Client Id: Enter the OAuth client ID.
      - OAuth Refresh Token: Enter the OAuth refresh token.
      - OAuth JWT Cert: Enter the OAuth JWT certificate.
      - OAuth JWT Cert Type: Select the OAuth JWT certificate type, one of:
        
        USER
        
        MACHINE
        
        PFXFILE
        
        PFXBLOB
        
        JKSFILE
        
        JKSBLOB
        
        PEMKEY_FILE
        
        PEMKEY_BLOB
        
        PUBLIC_KEY_FILE
        
        PUBLIC_KEY_BLOB
        
        SSHPUBLIC_KEY_FILE
        
        SSHPUBLIC_KEY_BLOB
        
        P7BFILE
        
        PPKFILE
        
        XMLFILE
        
        XMLBLOB
      - OAuth JWT Cert Subject: Enter the OAuth JWT certificate subject.
Use Proxy Settings: Select to use private agent proxy settings.
Advanced Configurations: When selected, shows the Advanced Configurations Properties table, which is used to add additional configuration properties as key-value pairs.

Click the add icon to add a row to the table below and enter a key-value pair for each property.

To save the row, click the submit icon in the rightmost column.

To edit or delete a single row, hover over the rightmost column and use the edit icon or delete icon .

To delete all rows, click Clear All.

Important

Fields in the Advanced Configurations table display the variable icon only in edit mode. For these fields' variable values to be populated at runtime, the agent version must be at least 10.75 / 11.13.
Test: Click to verify the connection using the specified configuration. When the connection is tested, the latest version of the connector is downloaded by the agent(s) in the agent group associated with the current environment. This connector supports suspending the download of the latest connector version by using the Disable Auto Connector Update organization policy.
Save Changes: Click to save and close the connection configuration.
Discard Changes: After making changes to a new or existing configuration, click to close the configuration without saving. A message asks you to confirm that you want to discard changes.
Delete: After opening an existing connection configuration, click to permanently delete the connection from the project and close the configuration (see Component dependencies, deletion, and removal). A message asks you to confirm that you want to delete the connection.

Next steps

After a Microsoft Exchange v2 connector connection has been created, you place an activity type on the design canvas to create activity instances to be used either as sources (to provide data in an operation) or as targets (to consume data in an operation).

Menu actions for a connection and its activity types are accessible from the project pane and design component palette. For details, see Actions menus in Connector basics.

These activity types are available:

Query: Retrieves records from a table at Microsoft Exchange and is intended to be used as a source in an operation.
Create: Inserts a record into a table at Microsoft Exchange and is intended to be used as a target in an operation.
Update: Updates a record in a table at Microsoft Exchange and is intended to be used as a target in an operation.
Delete: Deletes a record from a table at Microsoft Exchange and is intended to be used as a target in an operation.
Execute: Executes a procedure at Microsoft Exchange and is intended to be used as a target in an operation.