Quickbase Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.8804 of the connector.

Get Started

Quickbase Version Support

The connector leverages the Quickbase HTTP API to enable bidirectional access to Quickbase.

Establish a Connection

Authenticate to Quickbase

User Authentication

Set the AuthScheme to Basic to authenticate with this method.

To authenthenticate with user credentials, specify the following connection properties:

1. Set the Quickbase User and Password.
2. If your application requires an ApplicationToken, you must provide it otherwise an error will be thrown. You can find the ApplicationToken under MyAppName > Settings > App properties > Advanced settings > Security options > Require Application Tokens > Manage Application Token.

User Token

Set the AuthScheme to Token to authenticate with this method.

To authenthenticate with a user token, specify the following connection properties:

1. Set UserToken and you are ready to connect. You can find the UserToken under Quick Base > My Preferences > My User Information > Manage User Tokens.

Fine-Tuning Data Access

Other Properties

• IncludeTableReports: Determines if table reports should be listed as views.

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Quickbase connector.

User Defined Views

The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

Query Processing

The connector offloads as much of the SELECT statement processing as possible to Quickbase and then processes the rest of the query in memory (client-side).

User Defined Views

The Quickbase connector allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

• Create a JSON-formatted configuration file defining the views you want.
• DDL statements.

Define Views Using a Configuration File

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM [].[QuickBase].SampleTable_1 WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Define Views Using DDL Statements

The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.

Create a View

To create a new view using DDL statements, provide the view name and query as follows:

CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;

If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews connection property.

Alter a View

To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:

ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';

The view is then updated in the JSON configuration file.

Drop a View

To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.

DROP LOCAL VIEW [MyViewName]

This removes the view from the JSON configuration file. It can no longer be queried.

Schema for User Defined Views

User Defined Views are exposed in the UserViews schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName property.

Work with User Defined Views

For example, a SQL statement with a User Defined View called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Data Model

Overview

This section shows the available API objects and provides more information on executing SQL to Quickbase APIs.

Key Features

• The connector models Quickbase entities like documents, folders, and groups as relational views, allowing you to write SQL to query Quickbase data.
• Stored procedures allow you to execute operations to Quickbase
• Live connectivity to these objects means any changes to your Quickbase account are immediately reflected when using the connector.

Tables

Tables are automatically determined from the Quickbase.

Views

Views will be listed for table reports if IncludeTableReports is set to true.

Stored Procedures

Stored Procedures are function-like interfaces to Quickbase. Stored procedures allow you to execute operations to Quickbase, including downloading documents and moving envelopes.

Stored Procedures

Stored procedures are function-like interfaces that extend the functionality of the connector beyond simple SELECT/INSERT/UPDATE/DELETE operations with Quickbase.

Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from Quickbase, along with an indication of whether the procedure succeeded or failed.

Quickbase Connector Stored Procedures

CreateSchema

Creates a schema file for the specified table or view.

CreateSchema

Creates a local schema file (.rsd) from an existing table or view in the data model.

The schema file is created in the directory set in the Location connection property when this procedure is executed. You can edit the file to include or exclude columns, rename columns, or adjust column datatypes.

The connector checks the Location to determine if the names of any .rsd files match a table or view in the data model. If there is a duplicate, the schema file will take precedence over the default instance of this table in the data model. If a schema file is present in Location that does not match an existing table or view, a new table or view entry is added to the data model of the connector.

Input

Result Set Columns

UploadFile

Upload file attachments in Quick Base.

Input

Result Set Columns

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Quickbase:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the [].[Quickbase].SampleTable_1 table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='SampleTable_1' AND CatalogName='' AND SchemaName='QuickBase'

Columns

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SampleProcedure stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SampleProcedure' AND Direction=1 OR Direction=2

Columns

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the [].[Quickbase].SampleTable_1 table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='SampleTable_1' AND CatalogName='' AND SchemaName='QuickBase'

Columns

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys

Columns

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:quickbase:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

Connection

SSL

Schema

Miscellaneous

Authentication

This section provides a complete list of authentication properties you can configure.

AuthScheme

The type of authentication to use when connecting to Quickbase.

Possible Values

Auto, Basic, Token

Data Type

string

Default Value

Auto

Remarks

• Auto: Lets the driver decide automatically based on the other connection properties you have set.
• Basic: Set this to use BASIC user / password authentication.
• Token: Set this to perform Token Based Authentication.

Domain

Your Quickbase domain name.

Data Type

string

Default Value

""

Remarks

Your Quickbase domain name. Ex: quickbase.com

UserToken

The user token used to authenticate the user.

Data Type

string

Default Value

""

Remarks

This value may be specified instead of User and Password to authenticate.

User

The Quickbase user account used to authenticate.

Data Type

string

Default Value

""

Remarks

Together with Password, this field is used to authenticate against the Quickbase server.

Password

The password used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The User and Password are together used to authenticate with the server.

ApplicationToken

The application token used to authenticate the user.

Data Type

string

Default Value

""

Remarks

Used along with User, Password to authenticate with the server.

Connection

This section provides a complete list of connection properties you can configure.

Schema

Specify the Quickbase database you want to work with.

Data Type

string

Default Value

""

Remarks

Specify the Quickbase database you want to work with.

IncludeTableReports

Determines if Quickbase table reports should be listed as views.

Data Type

bool

Default Value

false

Remarks

This property should be set to "true" in order to list Quickbase table reports as views.

SSL

This section provides a complete list of SSL properties you can configure.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\Quickbase Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\Quickbase Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

BatchSize

The size of batches to submit when performing a bulk insert/update/delete operation.

Data Type

int

Default Value

10000

Remarks

This connection property controls how many records will be submitted to the Quickbase at a time when performing mass inserts and update operations.

Charset

Specifies the session character set for encoding and decoding character data transferred to and from the Quickbase API. The default value is UTF-8.

Data Type

string

Default Value

UTF-8

Remarks

Specifies the session character set for encoding and decoding character data transferred to and from the Quickbase API. The default value is UTF-8.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

MaxThreads

Specifies the number of concurrent requests.

Data Type

int

Default Value

5

Remarks

This property allows you to issue multiple requests simultaneously, thereby improving performance.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

Pagesize

The maximum number of results to return per page from Quickbase.

Data Type

int

Default Value

1000

Remarks

The Pagesize property affects the maximum number of results to return per page from Quickbase. Setting a higher value may result in better performance at the cost of additional memory allocated per page consumed.

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UseDefaultOrderBy

Indicates if a default order by should be applied if none is specified in the query.

Data Type

bool

Default Value

true

Remarks

By default, the Quickbase connector applies an order by when none is specified. This ensures that duplicate records do not get output when returning data. However, this will have a significant impact on performance for very large tables. If your use case can handle the possibility of duplicate primary keys, it is recommended to turn this off if you would like to have better performance.

UserDefinedViews

A filepath pointing to the JSON configuration file containing your custom views.

Data Type

string

Default Value

""

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM [].[QuickBase].SampleTable_1 WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.